Hi arnob,
you may not use SDA for a servo, if you are using the I2C-Bus with SRF08.
You can use other I/O pins on the RP6 Base.
There is a RP6Base Servo Library.
With this library you can use other pins for your servo.
Hi arnob,
you may not use SDA for a servo, if you are using the I2C-Bus with SRF08.
You can use other I/O pins on the RP6 Base.
There is a RP6Base Servo Library.
With this library you can use other pins for your servo.
Gruß
Dirk
Lesezeichen