Atmega8 mit vorhandenem C-Code, Probleme beim compilieren und übertragen auf den Chip

[Atmeg1970]

Hallo, erstmal vielen Dank für die Antworten. Zum Punkt 3 habe ich das C-Programm auch als Text-Datei vorliegen. Vielleicht funktioniert das ja auch direkt mit anderen Compilern anstatt mit CodeVision wie z.B. mit WinAVR oder AVR Studio.

Anbei der C-Code:

#include <mega8.h>
#include <delay.h>

unsigned char Lauflicht1[] = {1,2,4,8,16,32};
unsigned char Lauflicht2[] = {1,2,4,8,16,32,16,8,4,2};
unsigned char Lauflicht3[] = {33,18,12};
unsigned char Lauflicht4[] = {3,6,12,24,48,33};
unsigned char Lauflicht5[] = {33,18,12,12,18,33};
unsigned char Lauflicht6[] = {9,18,36};
unsigned char Lauflicht7[] = {9,18,36,18,9};

signed char modus = 0;
int i = 0;

#define ADC_VREF_TYPE 0xC0

// Read the AD conversion result
unsigned int read_adc(unsigned char adc_input)
{
ADMUX=adc_input | (ADC_VREF_TYPE & 0xff);
// Delay needed for the stabilization of the ADC input voltage
delay_us(10);
// Start the AD conversion
ADCSRA|=0x40;
// Wait for the AD conversion to complete
while ((ADCSRA & 0x10)==0);
ADCSRA|=0x10;
return ADCW;
}

// Timer 1 output compare A interrupt service routine
interrupt [TIM1_COMPA] void timer1_compa_isr(void)
{
TCNT1 = 0;
OCR1A = read_adc(0) * 8 + 300;
switch(modus)
{
case 0: PORTD = 63;
break;
case 1:
{
PORTD = ~Lauflicht1[i];
i++;
if (i >= sizeof(Lauflicht1))
i = 0;
}
break;
case 2:
{
PORTD = ~Lauflicht2[i];
i++;
if (i >= sizeof(Lauflicht2))
i = 0;
}
break;
case 3:
{
PORTD = ~Lauflicht3[i];
i++;
if (i >= sizeof(Lauflicht3))
i = 0;
}
break;
case 4:
{
PORTD = ~Lauflicht4[i];
i++;
if (i >= sizeof(Lauflicht4))
i = 0;
}
break;
case 5:
{
PORTD = ~Lauflicht5[i];
i++;
if (i >= sizeof(Lauflicht5))
i = 0;
}
break;
case 6:
{
PORTD = ~Lauflicht6[i];
i++;
if (i >= sizeof(Lauflicht6))
i = 0;
}
break;
case 7:
{
PORTD = ~Lauflicht7[i];
i++;
if (i >= sizeof(Lauflicht7))
i = 0;
}
break;
}

}

// Declare your global variables here

void main(void)
{
char check = 0;

// Input/Output Ports initialization
// Port B initialization
// Func7=In Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State7=T State6=T State5=T State4=T State3=T State2=T State1=T State0=P
PORTB=0x01;
DDRB=0x00;

// Port C initialization
// Func6=In Func5=In Func4=In Func3=In Func2=In Func1=In Func0=In
// State6=T State5=T State4=T State3=T State2=T State1=T State0=T
PORTC=0x00;
DDRC=0x00;

// Port D initialization
// Func7=Out Func6=Out Func5=Out Func4=Out Func3=Out Func2=Out Func1=Out Func0=Out
// State7=T State6=T State5=1 State4=1 State3=1 State2=1 State1=1 State0=1
PORTD=0x3F;
DDRD=0x3F;

// Timer/Counter 0 initialization
// Clock source: System Clock
// Clock value: Timer 0 Stopped
TCCR0=0x00;
TCNT0=0x00;

// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: 7,813 kHz
// Mode: Normal top=FFFFh
// OC1A output: Discon.
// OC1B output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer 1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: On
// Compare B Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x05;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1A = 100;
OCR1BH=0x00;
OCR1BL=0x00;

// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer 2 Stopped
// Mode: Normal top=FFh
// OC2 output: Disconnected
ASSR=0x00;
TCCR2=0x00;
TCNT2=0x00;
OCR2=0x00;

// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
MCUCR=0x00;

// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x10;

// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
SFIOR=0x00;

// ADC initialization
// ADC Clock frequency: 1000,000 kHz
// ADC Voltage Reference: Int., cap. on AREF
ADMUX=ADC_VREF_TYPE & 0xff;
ADCSRA=0x83;

// Global enable interrupts
#asm("sei")

while (1)
{
if (PINB.0 == 0 )
{
delay_ms(50);
if (PINB.0 == 0 && check == 0)
{
check = 1;
i=0;
modus++;
if (modus > 7)
modus = 0;
}
}
else
check = 0;

};
}

VG Michael