Ich habe jetzt alles soweit Fertig das Controllerboard besitzt einen Atmega 16PU mit einem 16mhz Quarz!
Im ProgTool von meinem Programmer http://shop.myavr.de/index.php?404;h...p?artDataID=36 Ist der Quarz Takt nur bis 12mhz auswählbar was soll ich denn dannn aus dieser Liste auswählen?

Brown-out detection level at VCC=4.0 V
Brown-out detection level at VCC=2.7 V

Brown-out detection enabled

Ext. Clock; Start-up time: 6 CK + 0 ms
Ext. Clock; Start-up time: 6 CK + 4 ms
Ext. Clock; Start-up time: 6 CK + 64 ms
Int. RC Osc. 1 MHz; Start-up time: 6 CK + 0 ms
Int. RC Osc. 1 MHz; Start-up time: 6 CK + 4 ms
Int. RC Osc. 1 MHz; Start-up time: 6 CK + 64 ms; default value
Int. RC Osc. 2 MHz; Start-up time: 6 CK + 0 ms
Int. RC Osc. 2 MHz; Start-up time: 6 CK + 4 ms
Int. RC Osc. 2 MHz; Start-up time: 6 CK + 64 ms
Int. RC Osc. 4 MHz; Start-up time: 6 CK + 0 ms
Int. RC Osc. 4 MHz; Start-up time: 6 CK + 4 ms
Int. RC Osc. 4 MHz; Start-up time: 6 CK + 64 ms
Int. RC Osc. 8 MHz; Start-up time: 6 CK + 0 ms
Int. RC Osc. 8 MHz; Start-up time: 6 CK + 4 ms
Int. RC Osc. 8 MHz; Start-up time: 6 CK + 64 ms
Ext. RC Osc. - 0.9 MHz; Start-up time: 18 CK + 0 ms
Ext. RC Osc. - 0.9 MHz; Start-up time: 18 CK + 4 ms
Ext. RC Osc. - 0.9 MHz; Start-up time: 18 CK + 64 ms
Ext. RC Osc. - 0.9 MHz; Start-up time: 6 CK + 4 ms
Ext. RC Osc. 0.9 MHz - 3.0 MHz; Start-up time: 18 CK + 0 ms
Ext. RC Osc. 0.9 MHz - 3.0 MHz; Start-up time: 18 CK + 4 ms
Ext. RC Osc. 0.9 MHz - 3.0 MHz; Start-up time: 18 CK + 64 ms
Ext. RC Osc. 0.9 MHz - 3.0 MHz; Start-up time: 6 CK + 4 ms
Ext. RC Osc. 3.0 MHz - 8.0 MHz; Start-up time: 18 CK + 0 ms
Ext. RC Osc. 3.0 MHz - 8.0 MHz; Start-up time: 18 CK + 4 ms
Ext. RC Osc. 3.0 MHz - 8.0 MHz; Start-up time: 18 CK + 64 ms
Ext. RC Osc. 3.0 MHz - 8.0 MHz; Start-up time: 6 CK + 4 ms
Ext. RC Osc. 8.0 MHz - 12.0 MHz; Start-up time: 18 CK + 0 ms
Ext. RC Osc. 8.0 MHz - 12.0 MHz; Start-up time: 18 CK + 4 ms
Ext. RC Osc. 8.0 MHz - 12.0 MHz; Start-up time: 18 CK + 64 ms
Ext. RC Osc. 8.0 MHz - 12.0 MHz; Start-up time: 6 CK + 4 ms
Ext. Low-Freq. Crystal; Start-up time: 1K CK + 4 ms
Ext. Low-Freq. Crystal; Start-up time: 1K CK + 64 ms
Ext. Low-Freq. Crystal; Start-up time: 32K CK + 64 ms
Ext. Crystal/Resonator Low Freq.; Start-up time: 258 CK + 4 ms
Ext. Crystal/Resonator Low Freq.; Start-up time: 258 CK + 64 ms
Ext. Crystal/Resonator Low Freq.; Start-up time: 1K CK + 0 ms
Ext. Crystal/Resonator Low Freq.; Start-up time: 1K CK + 4 ms
Ext. Crystal/Resonator Low Freq.; Start-up time: 1K CK + 64 ms
Ext. Crystal/Resonator Low Freq.; Start-up time: 16K CK + 0 ms
Ext. Crystal/Resonator Low Freq.; Start-up time: 16K CK + 4 ms
Ext. Crystal/Resonator Low Freq.; Start-up time: 16K CK + 64 ms
Ext. Crystal/Resonator Medium Freq.; Start-up time: 258 CK + 4 ms
Ext. Crystal/Resonator Medium Freq.; Start-up time: 258 CK + 64 ms
Ext. Crystal/Resonator Medium Freq.; Start-up time: 1K CK + 0 ms
Ext. Crystal/Resonator Medium Freq.; Start-up time: 1K CK + 4 ms
Ext. Crystal/Resonator Medium Freq.; Start-up time: 1K CK + 64 ms
Ext. Crystal/Resonator Medium Freq.; Start-up time: 16K CK + 0 ms
Ext. Crystal/Resonator Medium Freq.; Start-up time: 16K CK + 4 ms
Ext. Crystal/Resonator Medium Freq.; Start-up time: 16K CK + 64 ms
Ext. Crystal/Resonator High Freq.; Start-up time: 258 CK + 4 ms
Ext. Crystal/Resonator High Freq.; Start-up time: 258 CK + 64 ms
Ext. Crystal/Resonator High Freq.; Start-up time: 1K CK + 0 ms
Ext. Crystal/Resonator High Freq.; Start-up time: 1K CK + 4 ms
Ext. Crystal/Resonator High Freq.; Start-up time: 1K CK + 64 ms
Ext. Crystal/Resonator High Freq.; Start-up time: 16K CK + 0 ms
Ext. Crystal/Resonator High Freq.; Start-up time: 16K CK + 4 ms
Ext. Crystal/Resonator High Freq.; Start-up time: 16K CK + 64 ms

CalibrationOscCal 0 (1.0 MHz): 0OscCal 1 (2.0 MHz): 0OscCal 2 (4.0 MHz): 0OscCal 3 (8.0 MHz): 0