hehe, du bist gut, hab mir doch schon sowas gedacht:

Ausgabe ist jetzt:
Code:
rdude: Version 5.5, compiled on Feb 27 2008 at 12:52:40
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/

         System wide configuration file is "/etc/avrdude.conf"
         User configuration file is "/root/.avrduderc"
         User configuration file does not exist or is not a regular file, skippi                                                                                                                                   
ng

         Using Port            : /dev/parport0
         Using Programmer      : usbasp
         AVR Part              : ATMEGA32
         Chip Erase delay      : 9000 us
         PAGEL                 : PD7
         BS2                   : PA0
         RESET disposition     : dedicated
         RETRY pulse           : SCK
         serial program mode   : yes
         parallel program mode : yes
         Timeout               : 200
         StabDelay             : 100
         CmdexeDelay           : 25
         SyncLoops             : 32
         ByteDelay             : 0
         PollIndex             : 3
         PollValue             : 0x53
         Memory Detail         :

                                  Block Poll               Page                                                                                                                                                    
      Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  Max                                                                                                                                   
W   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ---                                                                                                                                   
-- ---------
           eeprom         4    10    64    0 no       1024    4      0  9000  90                                                                                                                                   
00 0xff 0xff
           flash         33     6    64    0 yes     32768  128    256  4500  45                                                                                                                                   
00 0xff 0xff
           lfuse          0     0     0    0 no          1    0      0  2000  20                                                                                                                                   
00 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  2000  20                                                                                                                                   
00 0x00 0x00
           lock           0     0     0    0 no          1    0      0  2000  20                                                                                                                                   
00 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0                                                                                                                                       
 0 0x00 0x00
           calibration    0     0     0    0 no          4    0      0     0                                                                                                                                       
 0 0x00 0x00

         Programmer Type : usbasp
         Description     : USBasp, http://www.fischl.de/usbasp/

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e9502
avrdude: safemode: lfuse reads as BF
avrdude: safemode: hfuse reads as CA
avrdude: current erase-rewrite cycle count is -50462977 (if being tracked)

avrdude: safemode: lfuse reads as BF
avrdude: safemode: hfuse reads as CA
avrdude: safemode: Fuses OK

avrdude done.  Thank you.
bringt uns das jetzt weiter? sollte ich mal den bootloader neu draufspielen, wenn der atmega noch "lebt"? Naja, Lämpchen sind auf jeden Fall gar keine an beim Flashvorgang. Also bis auf die SL4...