also ich hab jetzt die gesamte software noch mal neu instaliert hmm aber geht auch nicht und komischerweise egal wie gross mein pro. ist es sind immer 24 packete zum senden ??? auser natürlich bei anderen pro. die ich gedownlodet habe hmm nein keine fehler meldungen soweit ich das sehe


habe nen so einfaches pro gewählt da kan fast nix mehr falsch sein
Code:
#include asuro.h
int main(void) {
Init();
StatusLED(GREEN);
BackLED(ON);
while(1);
return 0;
}

und nun das was der compiler sagt

Code:
C:\programme zum programieren vom roboter\FirstTry>make all 
set -e; avr-gcc -MM -mmcu=atmega8 -I. -g -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-ahlms=asuro.lst asuro.c \
| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > asuro.d; \
[ -s asuro.d ] || rm -f asuro.d
set -e; avr-gcc -MM -mmcu=atmega8 -I. -g -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-ahlms=test.lst test.c \
| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > test.d; \
[ -s test.d ] || rm -f test.d
-------- begin --------
avr-gcc --version
avr-gcc (GCC) 3.3.1
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

avr-gcc -c -mmcu=atmega8 -I. -g -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-ahlms=test.lst test.c -o test.o
avr-gcc -c -mmcu=atmega8 -I. -g -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-ahlms=asuro.lst asuro.c -o asuro.o
avr-gcc -mmcu=atmega8 -I. -g -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-ahlms=test.o test.o asuro.o   --output test.elf -Wl,-Map=test.map,--cref -lm
avr-objcopy -O ihex -R .eeprom test.elf test.hex
avr-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" \
--change-section-lma .eeprom=0 -O ihex test.elf test.eep
avr-objdump -h -S test.elf > test.lss
Size after:
test.elf  :
section    size      addr
.text      1512         0
.data         0   8388704
.bss          1   8388704
.noinit       0   8388705
.eeprom       0   8454144
.stab      3120         0
.stabstr   1727         0
Total      6360


Errors: none
-------- end --------

> Process Exit Code: 0

äm aber wie hängt man ne datein bild oder so an ???