Code:
'-----------------------------------------------------------------------------------------

'name                     : bluetooth.bas

'purpose                  : Bluetootmodul

'micro                    : Atmega162

'-----------------------------------------------------------------------------------------

'.. Baud rate: 19200 bps
'.. Data bit: 8
'.. Parity: none
'.. Stop bit: 1
'.. Flow control: H/W or none
' Others: Please refer to AT Command Sets.

$regfile = "m162def.dat"                                    'Atmega162

$crystal = 1000000                                          'laeuft mit 1Mhz
$baud = 19200

Config Com1 = Dummy , Synchrone = 0 , Parity = None , Stopbits = 1 , Databits = 8 , Clockpol = 0

Config Porta.6 = Output                                     'LED2

Print "ATD0"
Wait 2
Print "ATN=Quadro"
Porta.6 = 1
Wait 1
Porta.6 = 0
Wait 1

Do
Porta.6 = 1
Wait 1
Print "test1"
Porta.6 = 0
Wait 1
Loop
Habe leider kein Oszi da, aber nach dem Code müsste es ja die Baud sein