Ok: neuer Stand

Dank Kater konnte ich die Fehlermeldung erfolgreich umgehen, und direkt eine neue provozieren:

$> uisp -dprog=dasa2 -dserial=/dev/ttyS0 -dno-poll --upload --verify if=/home/epic/dev/avr/helloworld/project.hex

Ausgabe:
Atmel AVR ATtiny2313 is found.
Uploading: flash
Verifying: flash
flash error at address 0x0: file=0x12, mem=0xff
...etc.

Kann damit jemand was anfangen?