Bascom und AVR Dragon

[maikatze]

Hallo,
wie kann ich den AVR Dragon in Bascom einbinden?
Phyton_rocks hatt bereits am 17.01 einige gute Anmerkungen dazu gemacht (Danke). Es muss eine cmd datei erstellt werden.
der Inhalt soll für einen Atmega8 wie folgt aussehen:

C:\Programme\Atmel\AVR Tools\AvrDragon\AVRDragon.exe" -d ATmega8 -e -mi -pf -if %1
pause


Welche bedeuungen haben dabei die optionen?

Gibt es weitere Möglichkeiten den Dragon in Bascom zu implementieren?

[python_rocks]

C:\Programme\Atmel\AVR Tools\AvrDragon\AVRDragon.exe" -d ATmega8 -e -mi -pf -if %1
pause

Welche bedeuungen haben dabei die optionen?

Hallo maikatze!

Führe das Programm "AVRDragon.exe" mit dem Kommandozeilenparameter "-h" aus. (z.B. so: "AVRDragon.exe -h"). Dann bekommst du eine Erklärung der Kommandozeilenparameter ausgegeben.

Das sieht dann so aus:

Usage: avrdragon.exe [commands] [options]
Commands:
 -h, -?		Print this help.
 -he		Print exit codes.
 -e		Erase device.
 -f <fusebytes>	Write high/low fuse bytes. The LSB of fusebytes will be
		written to the low fuse byte, and the MSB will be written
		to the high fuse byte.
 -j <ID>	Read JTAG ID string. If an optional ID is specified, the
		program will terminate if the read ID differs.
 -l <lockbyte>	Set the lock byte to the specified value.
 -p[f|e|b]	Program FLASH (-pf), EEPROM (-pe) or both (-pb) memories.
		Requires input files specified with the -if (FLASH)
		and/or -ie (EEPROM) options.
 -q		Read fuse bytes. If the selected device has extended fuse,
		it will be also be read.
 -r[f|e|b]	Read FLASH (-rf), EEPROM (-re) or both (-rb) memories.
		Requires output files specified with the -of (FLASH) and/or
		-oe (EEPROM) options.
 -s		Read signature bytes.
 -v[f|e|b]	Verify FLASH (-vf), EEPROM (-ve) or both (vb) memories.
		Requires input files specified with the -if (FLASH) and/or
		-ie (EEPROM) options.
 -y		Read lock byte.
 -E <ext.fuse>	Write extended fuse byte.
 -F <fusebytes>	Verify high/low fuse bytes. The LSB of fusebytes will be
		compared to the low fuse byte, and the MSB will be compared
		to the high fuse byte.
 -L <lockbyte>	Verify the lock byte.
 -G <ext.fuse>	Verify the extended fuse byte against the given value.
 -O <address>	Read oscillator calibration byte. Address is location of byte
		as specified in the device's data sheet.
 -S[f|e] <address>
		Write oscillator calibration byte read with -O or -Z to given
		location in FLASH (-Sf) or EEPROM (-Se).
 -W		Disable debugWIRE interface, enabling ISP mode. Only available
		for debugWIRE devices.
 -Y		Perform the oscillator calibration sequence. See appnote
		AVR053 for more information.
 -Z <address>	Load value from address in EEPROM prior to erasing the device.
		This value can be written to FLASH or EEPROM again with
		the -S[f|e] command.

Options:
 -ae <start>,<end>
		Specify address range for reading EEPROM memory. Default is
		entire memory.
 -af <start>,<end>
		Specify address range for reading FLASH memory. Default is
		entire memory.
 -d <device>	[required] Specify the type of device.
 -ie <file>	Specify input file for programming EEPROM memory.
 -if <file>	Specify input file for programming FLASH memory.
 -m[i|j|p]	Choose programming mode: ISP (-mi), parallel/high-voltage (-mp)
		or JTAG (-mj) (default).
 -oe <file>	Specify output file for reading EEPROM memory.
 -of <file>	Specify output file for reading FLASH memory.
 -z		No progress indicator. Useful when redirecting output to file.
 -D <devsbefore,devsafter,bitsbefore,bitsafter>
		Set daisy chain settings. Only available in JTAG mode.
 -I <speed>	Specify ISP frequency (Hz). Only available for ISP mode.
 -J <speed>	Specify device speed (Hz). Only available for JTAG mode.
 -R		Apply external reset while programming. Only available in
		JTAG mode.

Example usage: avrdragon.exe -d ATmega128 -e -pf -if c:\tmp\test.hex

Supported devices:
	AT90CAN128, AT90CAN32, AT90CAN64, AT90USB1286, AT90USB1287, 
	AT90USB646, AT90USB647, ATmega128, ATmega1280, ATmega1281, 
	ATmega16, ATmega162, ATmega164P, ATmega165, ATmega165P, 
	ATmega169, ATmega169P, ATmega2560, ATmega2561, ATmega32, 
	ATmega324P, ATmega325, ATmega3250, ATmega3250P, ATmega325P, 
	ATmega329, ATmega3290, ATmega3290P, ATmega329P, ATmega406, 
	ATmega64, ATmega640, ATmega644, ATmega644P, ATmega645, 
	ATmega6450, ATmega649, ATmega6490
Supported devices for ISP, PARALELL/SERIAL HV mode and oscillator cal. only:
	AT90PWM2, AT90PWM216, AT90PWM2B, AT90PWM3, AT90PWM316, AT90PWM3B, 
	AT90USB162, AT90USB82, ATmega168, ATmega168P, ATmega16HVA, 
	ATmega48, ATmega48P, ATmega88, ATmega88P, ATtiny13, ATtiny2313, 
	ATtiny24, ATtiny25, ATtiny261, ATtiny44, ATtiny45, ATtiny461, 
	ATtiny84, ATtiny85, ATtiny861

mfg
Gerold
:-)