Ich hab nochmal eine Frage zum LMP8270:
===========================
Im Datenblatt steht:

POWER SUPPLY DECOUPLING
In order to decouple the LMP8270 from AC noise on the power
supply, it is recommended to use a 0.1 μF on the supply
pin. It is best to use a 0.1 μF capacitor in parallel with a 10
μF capacitor. This will generate an AC path to ground for most
frequency ranges and will greatly reduce the noise introduced
by the power supply.

Ist das so gemeint:
O +5V
!
+----!! 0,1uF -----------! GND
!
+----!!10uF (Elko)-----! GND
!
!
+PIN 6
(Vcc) vom LMP8270


Gruß
Hans