Hallo RamJam,

4 Kanal Hardware PWM Beispiel für M32.

Code:
Config Portb = &B00001000
Config Portd = &B10110000


Config Timer0 = Pwm , Pwm = On , Compare = Clear , Prescale = 1
' 8 Bit PWM Ausgang Portb.3
Config Timer1 = Pwm , Pwm = 8 , Compare A Pwm = Clear Down , Compare B Pwm = Clear Down , Prescale = 1
' 8 Bit PWM Ausgang Portd.4 und Portd.5
Config Timer2 = Pwm , Pwm = On , Compare = Clear , Prescale = 1
' 8 Bit PWM Ausgang Portd.7
Enable Timer0
Enable Timer1
Enable Timer2
Enable Interrupts


Compare1a = Wert (0 - 255)
Compare1b = Wert (0 - 255)
Ocr0 = Wert (0 - 255)
Ocr2 = Wert (0 - 255)