cybrix@cybrix:~$ dmesg | tail
[17179666.636000] ide-cd: cmd 0x28 timed out
[17179666.636000] hdc: DMA interrupt recovery
[17179666.636000] hdc: lost interrupt
[17179671.640000] hdc: status timeout: status=0xd0 { Busy }
[17179671.640000] ide: failed opcode was: unknown
[17179671.640000] hdc: DMA disabled
[17179671.640000] hdc: drive not ready for command
[17179671.688000] hdc: ATAPI reset complete
[17180878.896000] USB 1-2: USB disconnect, address 2
[17180912.284000] USB 1-2: new full speed USB device using uhci_hcd and address 3