Hi,
Zitat Zitat von Javik
noch ne andere Frage: was hat es sich mit diesem HI-Z State auf sich?
High impedance
From Wikipedia, the free encyclopedia
A high impedance signal (also known as hi-Z, tri-stated, or floating) is a digital signal which is not being actively driven to a logical high or a logical low (hence "tri-stated"). A high-impedance signal can be seen as an open circuit (hence "floating") because connecting it to a circuit will not affect that circuit. On the contrary, connecting an actively driven signal to a high impedance signal will force the hi-Z signal to the same voltage level. Because of this, hi-Z pins are often used as input pins for ICs; they can be used to "read" the voltage of the attached signal without impacting that signal.
...
Zu gut Deutsch der Pin wartet darauf von aussen eine Spannung "aufgedrückt" zu bekommen.

Schau weiterhin mal in den Dokus der Atmel Chips unter den Ports nach, dort wir ziemlich gut beschrieben was die einzelnen Zustände für Auswirkungen auf den Chip haben (ist im Grundsatz übertragbar auf andere ICs).

Gruss