Hallo,

so, der mySmartUSB geht wieder, nun habe ich aber folgendes Problem:
Wenn ich "avrdude -p m8 -c AVR910 -P /dev/ttyUSB0 -U lfuse:w:FF -U hfuse:w Bild  9 -F" eingebe kommt das:

Code:
Found programmer: Id = "AVR ISP"; type = S
    Software Version = 1.5; Hardware Version = 2.0
Programmer supports auto addr increment.

Programmer supports the following devices:
    Device code: 0x55 = ATtiny12
    Device code: 0x01 = ATtiny13
    Device code: 0x56 = ATtiny15
    Device code: 0x13 = AT90S1200
    Device code: 0x28 = AT90S4414
    Device code: 0x20 = AT90S2313
    Device code: 0x4c = AT90S2343
    Device code: 0x30 = AT90S4433
    Device code: 0x6c = AT90S4434
    Device code: 0x38 = AT90S8515
    Device code: 0x68 = AT90S8535
    Device code: 0x41 = ATMEGA103
    Device code: 0x02 = ATMEGA64
    Device code: 0x43 = ATMEGA128
    Device code: 0x03 = AT90CAN128
    Device code: 0x74 = ATMEGA324
    Device code: 0x0e = ATMEGA644
    Device code: 0x04 = ATMEGA162
    Device code: 0x64 = ATMEGA163
    Device code: 0x75 = ATMEGA169
    Device code: 0x14 = ATMEGA329
    Device code: 0x15 = ATMEGA3290
    Device code: 0x16 = ATMEGA649
    Device code: 0x17 = ATMEGA6490
    Device code: 0x72 = ATMEGA32
    Device code: 0x60 = ATMEGA161
    Device code: 0x76 = ATMEGA8
    Device code: 0x3a = ATMEGA8515
    Device code: 0x05 = ATMEGA8535
    Device code: 0x5e = ATTINY26
    Device code: 0x06 = ATMEGA48
    Device code: 0x07 = ATMEGA88
    Device code: 0x08 = ATMEGA168
    Device code: 0x21 = ATtiny2313
    Device code: 0x09 = AT90PWM2
    Device code: 0x0a = AT90PWM3
    Device code: 0x22 = ATtiny25
    Device code: 0x23 = ATtiny45
    Device code: 0x24 = ATtiny85
    Device code: 0x0b = ATMEGA640
    Device code: 0x0c = ATMEGA1280
    Device code: 0x0d = ATMEGA1281
    Device code: 0x25 = ATtiny24
    Device code: 0x26 = ATtiny44
    Device code: 0x27 = ATtiny84

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.06s

avrdude: Device signature = 0x07931e
avrdude: reading input file "FF"
avrdude: error opening FF: No such file or directory
avrdude: input file FF auto detected as invalid format
avrdude: can't open input file FF: No such file or directory
avrdude: write to file 'FF' failed

avrdude: safemode: Fuses OK

avrdude done.  Thank you.
Irgendwas passt da nicht..

Viele Grüße,
Johannes