Code:
#define MAX_COM_PORTS 32
#define SCL_ON MS_CTS_ON
#define SDA_ON MS_DSR_ON
static HANDLE hComFile[MAX_COM_PORTS];
static BOOL bIsOpen [MAX_COM_PORTS];
static DCB sDcb [MAX_COM_PORTS];
static int iMsk [MAX_COM_PORTS];
//*****************************************************************************
//*
//* ComOpen
//*
//*****************************************************************************
// Öffnet eine serielle Verbindung
// Nr : Ist die Nummer des Com-Ports (0=COM1 1=COM2 ...)
// Baud : Ist die Bautrate
// Parity : 0 = kein Parity Bit
// 1 = gerade
// 2 = ungerade
// 3 = immer 0
// 4 = immer 1
// Stopbits : 0 = Ein Stopbit
// 1 = Ein/einhalb Stopbits
// 2 = Zwei Stopbits
// Bits : 0 = 7 Datenbits
// 1 = 8 Datenbits
// 7 = 7 Datenbits
// 8 = 8 Datenbits
// Ergibt 1 wenn eine Schnittstelle geöffnet wurde
int CRtport::CRtPortOpen (unsigned Nr,int Baud,int Parity,int Stopbits,int Databits)
{
static const int iPMode[] = {NOPARITY, EVENPARITY, ODDPARITY, SPACEPARITY, MARKPARITY};
static const int iSMode[] = {ONESTOPBIT, ONE5STOPBITS, TWOSTOPBITS};
char cName[]="\\\\.\\COM1";
HANDLE hFile;
COMMTIMEOUTS sTo;
if (Nr >= MAX_COM_PORTS) return 0;
if (bIsOpen[Nr]) return 0;
cName[7]='1' + Nr;
hFile = CreateFile (cName, GENERIC_READ|GENERIC_WRITE,0,0,
OPEN_EXISTING,FILE_ATTRIBUTE_NORMAL,0);
if (hFile==INVALID_HANDLE_VALUE)
{
hFile=0;
return 0;
}
if (Databits == 7)
Databits = 0;
memset(&sDcb[Nr],0,sizeof(sDcb[Nr]));
sDcb[Nr].DCBlength = sizeof(sDcb[Nr]);
sDcb[Nr].BaudRate = Baud;
sDcb[Nr].fParity = (Parity!=0)? TRUE:FALSE;
sDcb[Nr].fBinary = TRUE;
sDcb[Nr].Parity = iPMode[Parity];
sDcb[Nr].StopBits = ONESTOPBIT;
sDcb[Nr].fOutxCtsFlow = FALSE;
sDcb[Nr].fOutxDsrFlow = FALSE;
sDcb[Nr].fDtrControl = DTR_CONTROL_ENABLE;
sDcb[Nr].fRtsControl = RTS_CONTROL_ENABLE;
sDcb[Nr].fDsrSensitivity= FALSE;
sDcb[Nr].fAbortOnError = FALSE;
sDcb[Nr].ByteSize = (Databits)? 8:7;
if (!SetCommState(hFile,&sDcb[Nr]))
{
CloseHandle(hFile);
return 0;
}
sTo.ReadIntervalTimeout = MAXDWORD; // 0 ms Read-Timeout
sTo.ReadTotalTimeoutMultiplier = 0;
sTo.ReadTotalTimeoutConstant = 0;
sTo.WriteTotalTimeoutMultiplier= 1; // 1*2 ms Write Timeout
sTo.WriteTotalTimeoutConstant = 2;
if (!SetCommTimeouts((HANDLE)hFile,&sTo))
{
CloseHandle(hFile);
return 0;
}
hComFile[Nr] = hFile;
bIsOpen [Nr] = TRUE;
return 1;
}
//*****************************************************************************
//*
//* ComClose
//*
//*****************************************************************************
int CRtport::CRtPortClose (unsigned Nr)
{
if (Nr >= MAX_COM_PORTS) return 0;
if (!bIsOpen[Nr]) return 0;
CloseHandle(hComFile[Nr]);
hComFile[Nr]=0;
bIsOpen [Nr]=FALSE;
return 1;
}
//*****************************************************************************
int CRtport::CRtPortI2CStop (unsigned Nr)
{
if (CRtPortCheckNr(Nr)) return(CRtPortStopNr(Nr));
else return(0);
}
//*****************************************************************************
//*
//* Send Bytes
//*
//*****************************************************************************
int CRtport::CRtPortCheckNr (unsigned Nr)
{
if (Nr >= MAX_COM_PORTS) return 0;
if (!bIsOpen[Nr]) return 0;
GetCommState(hComFile[Nr],&sDcb[Nr]);
return(1);
}
//*****************************************************************************
int CRtport::CRtPortGetLine (unsigned Nr)
{
int iModem = 0;
if (!CRtPortCheckNr(Nr)) return 0;
if (!GetCommModemStatus(hComFile[Nr], (unsigned long*)&iModem))
return 0;
return(iModem);
}
//*****************************************************************************
//*
//* Set DRS CTS
//*
//*****************************************************************************
int CRtport::CRtPortSCLNr (unsigned Nr, int Val)
{
if (Val) sDcb[Nr].fRtsControl = RTS_CONTROL_ENABLE;
else sDcb[Nr].fRtsControl = RTS_CONTROL_DISABLE;
return (SetCommState(hComFile[Nr],&sDcb[Nr]));
}
//*****************************************************************************
int CRtport::CRtPortSDANr (unsigned Nr, int Val)
{
if (Val) sDcb[Nr].fDtrControl = DTR_CONTROL_ENABLE;
else sDcb[Nr].fDtrControl = DTR_CONTROL_DISABLE;
return (SetCommState(hComFile[Nr],&sDcb[Nr]));
}
//*****************************************************************************
static void _delay(void)
{
int iX;
for (iX = 0; iX < 255;iX++)
{
}
}
//*****************************************************************************
int CRtport::CRtPortStopNr (unsigned Nr)
{
CRtPortSDANr(Nr, 0);
_delay();
CRtPortSCLNr(Nr, 1);
_delay();
CRtPortSDANr(Nr, 1);
_delay();
return (1);
}
//*****************************************************************************
int CRtport::CRtPortStartNr (unsigned Nr)
{
CRtPortSDANr(Nr, 0);
_delay();
CRtPortSCLNr(Nr, 0);
_delay();
return (1);
}
//*****************************************************************************
int CRtport::CRtPortTickNr (unsigned Nr)
{
int iNew;
int iAck;
CRtPortSCLNr (Nr, 1);
do { GetCommModemStatus(hComFile[Nr], (unsigned long*)&iNew);
} while (!(iNew & SCL_ON));
if (iNew & SDA_ON) iAck = 1;
else iAck = 0;
_delay();
CRtPortSCLNr (Nr, 0);
_delay();
return(iAck);
}
//*****************************************************************************
int CRtport::CRtPortI2CSendByte (unsigned Nr, int Val)
{
int iCnt;
int iByte = Val;
for (iCnt = 0; iCnt < 8; iCnt++)
{
if (iByte & 0x80) CRtPortSDANr(Nr, 1);
else CRtPortSDANr(Nr, 0);
_delay();
CRtPortTickNr (Nr);
iByte <<= 1;
}
CRtPortSDANr(Nr, 1);
_delay();
return(CRtPortTickNr (Nr));
}
//*****************************************************************************
int CRtport::CRtPortI2CStart (unsigned Nr)
{
int iNew = 0;
if (!CRtPortCheckNr(Nr)) return 0;
CRtPortSDANr(Nr, 1);
CRtPortSCLNr(Nr, 1);
do { GetCommModemStatus(hComFile[Nr], (unsigned long*)&iNew);
} while (!(iNew & SCL_ON) || !(iNew & SDA_ON));
return(CRtPortStartNr(Nr));
}
Das Senden hat im Prinzip ja geklappt. 
Zitat von linux_80
Berechtigungen
Zitieren
Lesezeichen