Hallo FlashCube!
Willkommen im Forum!

Wenn du deinen Servo nur um eine bestimmte Schrittzahl drehen willst musst du noch einen Zähler einbauen:
Code:
$regfile = "m8def.dat" 
$crystal = 1000000 
Dim A as Byte
A=1
Config Portb = Output 

Do 
   Portb.1 = 1 
   Waitus 1500 

   Portb.1 = 0 
   Waitms 20
   Incr A 

Loop Until A = 10


End
Dein Motor sollte sich jetzt um 10 Schritte bewegen...
$crystal gibt übrigens an, wie schnell dein Quarz ist.

MFG!