PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : [ERLEDIGT] 1Wire DS1820 no eins



gothe
29.04.2005, 22:22
folgendes....
Code:

//////////////////////////////////////////////////////////////////////////////
// OW_RESET - performs a reset on the one-wire bus and
// returns the presence detect. Reset is 480us, so delay

unsigned char ow_reset(void)
{
unsigned char presence;
DQ = 0; //pull DQ line low
delay(29); // leave it low for 480us
DQ = 1; // allow line to return high
delay(3); // wait for presence
presence = DQ; // get presence signal
delay(25); // wait for end of timeslot
return(presence); // presence signal returned
} // 0=presence, 1 = no part


DQ=0 und DQ=1 DAS IST MEIN PROBLEM, denk ich!!

ich hab s nämlich mit :

Code:

unsigned char ow_reset(void)
{
unsigned char presence;
output_low(DQ); //pull DQ line low
delay_us(480); // leave it low for 480us
output_high(DQ); // allow line to return high
delay_us(70); // wait for presence
presence = DQ; // get presence signal
delay_us(410); // wait for end of timeslot
return(presence); // presence signal returned
} // 0=presence, 1 = no part



gemacht..

jetzt Frage: DQ=0 bzw. 1 nimmt er nicht an!
muss ich jeweils selber den TRIS des PIns verändern?
und könnt mir jemand sagen wo ich überall die TRIS verändern muss
und wo die outputs passen, oder sollte ich inputs verwenden ..................?




Code:


#include <16f870.h>
#use delay(clock=4000000)
#fuses XT,NOWDT,NOLVP

#define SKIP_ROM 0xCC
#define CONVERT_T 0x44
#define READ_SCRATCHPAD 0xBE

#define DQ PIN_C4
//#define Tx_DS1820 PIN_C5

#use rs232(baud=9600,xmit=PIN_C6,rcv=PIN_C7)


//////////////////////////////////////////////////////////////////////////////
// OW_RESET - performs a reset on the one-wire bus and
// returns the presence detect. Reset is 480us, so delay
// value is (480-24)/16 = 28.5 - we use 29. Presence checked
// another 70us later, so delay is (70-24)/16 = 2.875 - we use 3.
//
unsigned char ow_reset(void)
{
unsigned char presence;
output_low(DQ); //pull DQ line low
delay_us(480); // leave it low for 480us
output_high(DQ); // allow line to return high
delay_us(70); // wait for presence
presence = DQ; // get presence signal
delay_us(410); // wait for end of timeslot
return(presence); // presence signal returned
} // 0=presence, 1 = no part




//////////////////////////////////////////////////////////////////////////////
// READ_BIT - reads a bit from the one-wire bus. The delay
// required for a read is 15us, so the DELAY routine won't work.
// We put our own delay function in this routine in the form of a
// for() loop.
//
unsigned char read_bit(void)
{
unsigned char i;
output_low(DQ); // pull DQ low to start timeslot
output_high(DQ); // then return high
for (i=0; i<3; i++); // delay 15us from start of timeslot
return(DQ); // return value of DQ line
}




//////////////////////////////////////////////////////////////////////////////
// WRITE_BIT - writes a bit to the one-wire bus, passed in bitval.
//
void write_bit(char bitval)
{
output_low(DQ); // pull DQ low to start timeslot
if(bitval==1) output_high(DQ); // return DQ high if write 1
delay_us(104); // hold value for remainder of timeslot
output_high(DQ);
}// Delay provides 16us per loop, plus 24us. Therefore delay(5) = 104us


//////////////////////////////////////////////////////////////////////////////
// READ_BYTE - reads a byte from the one-wire bus.
//
unsigned char read_byte(void)
{
unsigned char i;
unsigned char value = 0;
for (i=0;i<8;i++)
{
if(read_bit()) value|=0x01<<i; // reads byte in, one byte at a time and then
// shifts it left
delay_us(120); // wait for rest of timeslot
}
return(value);
}



//////////////////////////////////////////////////////////////////////////////
// WRITE_BYTE - writes a byte to the one-wire bus.
//
void write_byte(char val)
{
unsigned char i;
unsigned char temp;
for (i=0; i<8; i++) // writes byte, one bit at a time
{
temp = val>>i; // shifts val right 'i' spaces
temp &= 0x01; // copy that bit to temp
write_bit(temp); // write bit in temp into
}
delay_us(104);
}

void main()
{
char get[10];
int k;
char temp_f,temp_c;

while(1)
{

ow_reset();
write_byte(0xCC); //Skip ROM
write_byte(0x44); // Start Conversion
delay_us(104);
ow_reset();
write_byte(0xCC); // Skip ROM
write_byte(0xBE); // Read Scratch Pad
for (k=0;k<9;k++)
{ get[k]=read_byte();
}

printf("\n ScratchPAD DATA = %X%X%X%X%X\n",get[8],get[7],get[6],get[5],get[4],get[3],get[2],get[1],get[0]);


}
}



thx

Ciclope
01.05.2005, 10:19
Hallo,

also wenn ihr schon ein wenig Code hier rein postet dan tut es doch ein wenig strukturierter nicht jeder hat lust sich in so was mal einzulesen!!!!!

Gruß