MajorTwip
23.07.2006, 14:56
Hi all.
hab da auf eBay was entdeckt. So n ami verkauft CuTouchs, habs mal angeschaut und mich ein bischen Schlau gemacht
eBay:
CT1721 START KIT
VISUAL TOUCH CONTROLLER KIT
The CuTOUCH™ essentianlly serves as the brains inside of electronics projects and applications that require a programmable microcontroller or a PLC.
The CuTOUCH™ has ability to control and monitor switches, timers, motors, sensors, relays, valves, and etc...
The best part is that programming may be performed in the CUBLOC BASIC Ladder Logic lanugage. CUBLOC BASIC is very similar to most other BASIC chips and Ladder Logic is very similar to industr PLC standards with a quick learning curve.
Whether you are a 7 year old child or a 80 year old man, you can still learn CUBLOC BASIC within hours!
Ideal for apps requiring industrial controller integrated with Touch-screen interface, customizable user inputs, TTL inputs, opto-isolated 24V inputs, TTL outputs, and 24V TR outputs. Replace outdated buttons, LCDs, industrial controllers with one single ALL-integrated CuTOUCH.
Ideal for apps requiring RTC (Real Time Clock) and data memory back-up during power-down.
Ideal for apps requiring large data memory. (e.g. Modbus RTU Master
Ideal for small to mass production (1 to 1000+), Mountable on custom steel enclosures.
Dual Processor Atmega128: First Processor is dedicated to Touch screen and graphic LCD control, Second Processor is dedicated to Basic and Ladder Logic Multi-tasking.
Super BRIGHT 320 x 240 Blue and White Graphic LCD
Touch-screen protected by outer acrylic layer
Internal Back-up Super Capacitor for Data Backup (SRAM)
Internal Real Time Clock (RTC)
MODBUS ASCII (Master & Slave Mode) Support
MODBUS RTU (Master & Slave Mode) Support
External Peripherals CuNET (I2C) included.
External Peripherals SPI included.
Develop using CublocStudio in BASIC and/or Ladder Logic Language.
Easy-to-use software for GUI development included.
Automatic source-code generation for graphics .
Processor
CuTOUCH™ CT1721
Microprocessor
Dual Core Atmega128 @ 18.432Mhz
Program Memory (Flash)
80KB
Data Memory (RAM)
24KB(BASIC)+4KB(Ladder Logic)
EEPROM
4KB EEPROM
Program Speed
36,000/sec
General Purpose I/O
- 82 I/O lines (TTL & 24V DC) (1 TTL input, 32 24V DC opto-isolated inputs + 32 24V TR outputs + 17 TTL input/output configurable)
Serial Ports for Communication
- 2 High-speed hardware-independent serial ports (Channel 0 & 1 : RS232C 12V)
- Configurable Baud rates: 2400bps to 230,400 bps
Analog Inputs
8 channel 10-bit ADCs
Configurable Voltage: 0 to 5V OR 0 to 10V
Analog Outputs
- 6 Channel 16-bit PWMs (DACs)
- Output Voltage Range: 0 to 5V
- Configurable Frequencies: 35hz to 1.15Mhz
External Interrupts
4 Channels
High Speed Counters
2 Channel 16-bit Counters (up to 2Mhz)
Power
- Required Power: 24V DC
- Current Consumption w/ ports unloaded:
CT1720 Current Consumption
@ 24V w/ Backlight ON: 170mA
@ 24V w/ Backlight OFF: 70mA
RTC
(Real Time Clock)
Yes
Timers
- 1 User Configurable Timer
- Configurable Interval Units = 10ms
Data Memory Back-up
*Yes, a 1 Fahrad rechargable Super-Capacitor is included.
Operating Temperature
0 °C to 70 °C
Package
Integrated Touch-screen Panel w/ 2mm Headers and 2.5mm RCABLE Headers
Size
- 7.17" x 5.17" x 0.98" (182.2 x 131.4 x 25 mm)
- Viewing Area (Touch-sesitive):
4.5" x 3.4" (5.6" diagonal)
* The 1.0F rechargable super-capacitor on the CuTOUCH™ will back up the data memory of the CuTOUCH™ module for a period of approximately 10 days during power-down.
For longer duration of backup period, please use a battery or a super-capacitor with larger capacity (e.g. A 10F super-capacitor will last you ~100 days or 3 months, a battery can extend this period to 1 to 10 years depending on the capacity of the battery used)
I/O Connectors and Brackets are included for metal panel mounting.
For connector info, please refer to Product->ETC->Connectors on our homepage.
Ist der zu was zu gebrauchen?
Freue mich auf (fast^^) alle Posts!
mfG MT
hab da auf eBay was entdeckt. So n ami verkauft CuTouchs, habs mal angeschaut und mich ein bischen Schlau gemacht
eBay:
CT1721 START KIT
VISUAL TOUCH CONTROLLER KIT
The CuTOUCH™ essentianlly serves as the brains inside of electronics projects and applications that require a programmable microcontroller or a PLC.
The CuTOUCH™ has ability to control and monitor switches, timers, motors, sensors, relays, valves, and etc...
The best part is that programming may be performed in the CUBLOC BASIC Ladder Logic lanugage. CUBLOC BASIC is very similar to most other BASIC chips and Ladder Logic is very similar to industr PLC standards with a quick learning curve.
Whether you are a 7 year old child or a 80 year old man, you can still learn CUBLOC BASIC within hours!
Ideal for apps requiring industrial controller integrated with Touch-screen interface, customizable user inputs, TTL inputs, opto-isolated 24V inputs, TTL outputs, and 24V TR outputs. Replace outdated buttons, LCDs, industrial controllers with one single ALL-integrated CuTOUCH.
Ideal for apps requiring RTC (Real Time Clock) and data memory back-up during power-down.
Ideal for apps requiring large data memory. (e.g. Modbus RTU Master
Ideal for small to mass production (1 to 1000+), Mountable on custom steel enclosures.
Dual Processor Atmega128: First Processor is dedicated to Touch screen and graphic LCD control, Second Processor is dedicated to Basic and Ladder Logic Multi-tasking.
Super BRIGHT 320 x 240 Blue and White Graphic LCD
Touch-screen protected by outer acrylic layer
Internal Back-up Super Capacitor for Data Backup (SRAM)
Internal Real Time Clock (RTC)
MODBUS ASCII (Master & Slave Mode) Support
MODBUS RTU (Master & Slave Mode) Support
External Peripherals CuNET (I2C) included.
External Peripherals SPI included.
Develop using CublocStudio in BASIC and/or Ladder Logic Language.
Easy-to-use software for GUI development included.
Automatic source-code generation for graphics .
Processor
CuTOUCH™ CT1721
Microprocessor
Dual Core Atmega128 @ 18.432Mhz
Program Memory (Flash)
80KB
Data Memory (RAM)
24KB(BASIC)+4KB(Ladder Logic)
EEPROM
4KB EEPROM
Program Speed
36,000/sec
General Purpose I/O
- 82 I/O lines (TTL & 24V DC) (1 TTL input, 32 24V DC opto-isolated inputs + 32 24V TR outputs + 17 TTL input/output configurable)
Serial Ports for Communication
- 2 High-speed hardware-independent serial ports (Channel 0 & 1 : RS232C 12V)
- Configurable Baud rates: 2400bps to 230,400 bps
Analog Inputs
8 channel 10-bit ADCs
Configurable Voltage: 0 to 5V OR 0 to 10V
Analog Outputs
- 6 Channel 16-bit PWMs (DACs)
- Output Voltage Range: 0 to 5V
- Configurable Frequencies: 35hz to 1.15Mhz
External Interrupts
4 Channels
High Speed Counters
2 Channel 16-bit Counters (up to 2Mhz)
Power
- Required Power: 24V DC
- Current Consumption w/ ports unloaded:
CT1720 Current Consumption
@ 24V w/ Backlight ON: 170mA
@ 24V w/ Backlight OFF: 70mA
RTC
(Real Time Clock)
Yes
Timers
- 1 User Configurable Timer
- Configurable Interval Units = 10ms
Data Memory Back-up
*Yes, a 1 Fahrad rechargable Super-Capacitor is included.
Operating Temperature
0 °C to 70 °C
Package
Integrated Touch-screen Panel w/ 2mm Headers and 2.5mm RCABLE Headers
Size
- 7.17" x 5.17" x 0.98" (182.2 x 131.4 x 25 mm)
- Viewing Area (Touch-sesitive):
4.5" x 3.4" (5.6" diagonal)
* The 1.0F rechargable super-capacitor on the CuTOUCH™ will back up the data memory of the CuTOUCH™ module for a period of approximately 10 days during power-down.
For longer duration of backup period, please use a battery or a super-capacitor with larger capacity (e.g. A 10F super-capacitor will last you ~100 days or 3 months, a battery can extend this period to 1 to 10 years depending on the capacity of the battery used)
I/O Connectors and Brackets are included for metal panel mounting.
For connector info, please refer to Product->ETC->Connectors on our homepage.
Ist der zu was zu gebrauchen?
Freue mich auf (fast^^) alle Posts!
mfG MT