ATTINY2313 + Winavr not Supported?

[DeltaEx]

Hi,

Ich wollte gerade meinen ATTINY2313 mit Winavr programmieren, doch der ATTINY2313 taucht unter dem Tool MFile [WinAVR] um das Make file zu machen nicht auf?!
Soll man einfach den AT90s1313 nehmen?


Und wenn ich versuche den LCD Sourcecode von Ulrich Radig zu kompilieren dan erscheint die Fehlermeldung:



> "make.exe" all
set -e; avr-gcc -MM -mmcu=at90s2313 -I. -g -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=lcd.lst -std=gnu99 lcd.c \
| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > lcd.d; \
[ -s lcd.d ] || rm -f lcd.d
set -e; avr-gcc -MM -mmcu=at90s2313 -I. -g -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=main.lst -std=gnu99 main.c \
| sed 's,\(.*\)\.o[ :]*,\1.o \1.d : ,g' > main.d; \
[ -s main.d ] || rm -f main.d

-------- begin --------
avr-gcc (GCC) 3.4.3
Copyright (C) 2004 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.


Compiling: main.c
avr-gcc -c -mmcu=at90s2313 -I. -g -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=main.lst -std=gnu99 main.c -o main.o

Compiling: lcd.c
avr-gcc -c -mmcu=at90s2313 -I. -g -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=lcd.lst -std=gnu99 lcd.c -o lcd.o

Linking: main.elf
avr-gcc -mmcu=at90s2313 -I. -g -Os -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums -Wall -Wstrict-prototypes -Wa,-adhlns=main.o -std=gnu99 main.o lcd.o --output main.elf -Wl,-Map=main.map,--cref -lm
lcd.o(.text+0x0): In function `Read_LCD':
C:\WinAVR\projekts/lcd.c:77: multiple definition of `Read_LCD'
main.o(.text+0x0):C:\WinAVR\projekts/lcd.c:77: first defined here
lcd.o(.text+0x3a): In function `Write_LCD':
C:\WinAVR\projekts/lcd.c:46: multiple definition of `Write_LCD'
main.o(.text+0x3a):C:\WinAVR\projekts/lcd.c:46: first defined here
lcd.o(.text+0x86): In function `LCD_Init':
C:\WinAVR\projekts/lcd.c:18: multiple definition of `LCD_Init'
main.o(.text+0x86):C:\WinAVR\projekts/lcd.c:18: first defined here
lcd.o(.text+0xde): In function `LCD_print_str':
C:\WinAVR\projekts/lcd.c:214: multiple definition of `LCD_print_str'
main.o(.text+0xde):C:\WinAVR\projekts/lcd.c:214: first defined here
lcd.o(.text+0xfe): In function `LCD_Print':
C:\WinAVR\projekts/lcd.c:114: multiple definition of `LCD_Print'
main.o(.text+0xfe):C:\WinAVR\projekts/lcd.c:114: first defined here
lcd.o(.text+0x2ce): In function `LCD_Clear':
C:\WinAVR\projekts/lcd.c:223: multiple definition of `LCD_Clear'
main.o(.text+0x2ce):C:\WinAVR\projekts/lcd.c:223: first defined here
make.exe: *** [main.elf] Error 1

> Process Exit Code: 2


makefile:



# MCU name
MCU = at90s2313

# Output format. (can be srec, ihex, binary)
FORMAT = ihex

# Target file name (without extension).
TARGET = main

# Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization.
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
OPT = s


# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c lcd.c

# If there is more than one source file, append them above, or modify and
# uncomment the following:
#SRC += foo.c bar.c

# You can also wrap lines by appending a backslash to the end of the line:
#SRC += baz.c \
#xyzzy.c